Adding Or Deleting A Channel; Adjusting Aspect Ratio And Scan Velocity; Tv Speakers And Audio Output Settings - Sanyo DS27930 Manual Del Propietário

Ocultar thumbs Ver también para DS27930:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

QuickTips
Channels deleted
from scan memory
can be selected with
the number keys.
Restoring deleted
channels, use the
on-screen menu to
manually add chan-
nels or start CH.
(Channel) Search
from the menu.
It may take a few
minutes to search
thru the available
channels, or press
RESET key twice.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Scan Velocity
This unit features an electronic circuit that regulates the scan speed of the electron
beam creating sharp transitions between the light and dark portions of the picture.
The result is crisp edges and sharply-defined clarity.
1. Press MENU key.
2. Use the ▲/▼ keys to highlight Scan Velocity.
3. Press the – /+ keys to select Off, Low, or High.
TV Speakers
1. Press MENU key.
2. Use the ▲/▼ keys to highlight TV Speakers.
3. Press the – /+ keys to turn the speakers ON or OFF.
Note: Sound will not be produced through your TV speakers if the OFF mode is selected.
Audio Output
This convenient menu option enables you to select a fixed or variable audio signal.
1. Press MENU key.
2. Use the ▲/▼ keys to highlight Audio Output.
3. Press the – /+ keys to select Fixed or Variable.
Fixed Mode (Constant audio output level from TV)
Use external equipment's volume control to adjust sound level.
Variable Mode (Output from TV varies with volume)
Use the TV and external equipment's volume controls to adjust the sound level.
14
Add or Delete Channels / Aspect Ratio / Scan Velocity / TV Speakers / Audio Output
Adding or Deleting Channels
1. Press MENU key.
2. Use the ▲ /▼ keys to highlight CH. Scan Memory.
3. Press the
key to highlight channel number entry area.
+
4. Enter the channel number you want to add or delete (example): C34. For cable channels
above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.
5. Press the
key to change the present setting.
+
Example: Added will change to Deleted. This
takes about three seconds. During that time, the
word "Added" or "Deleted" will become yellow.
6. Use the 0~9 or ▲▼ keys to choose other channels
to delete or add, or press the MENU key to exit.
Aspect Ratio
Use this feature when digital equipment is connected to the component input jacks. The 4:
3 setting is for normal viewing. The 16:9 setting changes the picture image to wide-screen
viewing with minimal portion of top and bottom
compressed.
1. Press MENU key.
2. Use the ▲ /▼ keys to highlight Aspect Ratio.
3. Press the – /+ keys to select 4:3 or 16:9.
CH. Scan Memory
Aspect Ratio
Scan Velocity
TV Speakers
Audio Output
Menu Language
Select channel using ▲▼
Select channel using
Press MENU key to exit
Press MENU key to exit
➧ON
TV Speakers
TV Speakers
ON
Audio Output
Menu Language
Press MENU key to exit
TV Speakers
Audio Output
Audio Output
Menu Language
Press MENU key to exit
C 34
C 34
Deleted
▲▼, , 0~9 keys
0~9 keys
➧4:3
Aspect Ratio
Aspect Ratio
4:3
Scan Velocity
TV Speakers
Audio Output
Menu Language
Press MENU key to exit
OFF ➧ Low
Scan Velocity
Scan Velocity
TV Speakers
Audio Output
Menu Language
Press MENU key to exit
OFF
Fixed ➧Variable
Variable
16:9
High
High

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ds32424

Tabla de contenido