IRUDEK OREKA Instrucciones De Uso página 16

- Headlamp: for use with headlamp, fit the elastic band of it on the
clips designed for this use.
- Auditive Protection: the helmet is equipped with 30mm side slots to
fit SECURE earmuffs.
WARNING
-Before and during use of the equipment, verify that the equipment is in
good condition and operates correctly. Carefully check all components of
the helmet to check for:
-Deformation outside or inside.
-Cracks on the outer surface or inside.
-Malfunction, or broken buckle.
- Malfunction, or broken adjustment system.
-Check the webbing and stitching, that they have no cuts or
abrasions.
-Absence or poor condition of the protective padding.
The helmet is designed to absorb the kinetic energy during an impact by
complete or partial destruction of the housing and the harness, although
this damage is not apparent, all helmets that have suffered a serious impact
must be replaced.
LIMITATIONS FOR USE
- Personal protective equipment should be a personal issue item.
- Personal protective equipment must not be used by a person with medical
condition that could affect the safety of the equipment user in normal and
emergency use.
- Personal protective equipment shall only be used by a person trained and
competent in its safe use.
RESPONSIBILITY
Irudek or the distributor assumes no responsibility for any damage, injury
or death caused by misuse or modification of any Irudek brand product. It
is the user's responsibility to ensure that he/she understands the correct and
safe use of any Irudek products, that it is used only for the purpose for
which it has been designed.
WARRANTY :
This product is guaranteed for 2 years, which starts counting from the date
of purchase against defects in materials or manufacturing. This warranty
does not cover misuse, unauthorized modifications in the product or failure
to follow the instructions of use supplied with the product.
INFORMATION & ADVICE
- A rescue plan shall be in place to deal with any emergencies that could
arise during the work.
- It is forbidden to make any alterations or additions to the equipment
without the manufacturer´s prior written consent.
- Do not apply paint, solvents, adhesives or stickers to helmets, since they
could reduce the effectiveness of the helmet.
- Personal protective equipment shall not be used outside its limitations, or
for any purpose other than that for which it is intended.
- Before use ensure about the compatibility of items of equipment when
assembled into a system. Ensure that all items are compatible and
appropriate for the proposed application. It is forbidden to use
combinations of items of equipment in which the safe function of any one
item is affected by or interferes with the safe function of another.
Periodically check the connection and adjustment of the components to
avoid accidental disconnection and loosening.
- Personal protective equipment must be withdrawn from use immediately
when any doubt arise about its condition for safe use.
- There are many hazards that may affect the performance of the equipment
during use and safety caution have to be observed during use, especially:
-Any defects like cutting, abrasion, corrosion
-Climatic exposure,
-Extreme temperatures
-Chemical reagents,