Instructions For Maintenance - IRUDEK OREKA Instrucciones De Uso

-It is essential for the safety of the user that if the product is re-sold outside
the original country of destination the reseller shall provide instructions for
use, for maintenance, for periodic examination and for repair in the
language of the country in which the product is to be used.
LIFETIME
The estimated product lifetime is 11 years from the date of manufacture (1
year storage + 10 years for use). The following factors can reduce the
lifetime of the product : intense use, contact with chemical substances,
specially agressive environment, extreme temperature exposure, UV
exposure, abrasion, cuts, violent impacts, bad use or maintenance.
TRANSPORT
The Personal Protective Equipment must be transported in a package that
protects it against moisture or mechanical, chemical and thermal attacks.

INSTRUCTIONS FOR MAINTENANCE

-CLEANING: The personal protective equipment must be cleaned
without causing adverse effect on the materials used in the manufacture of
the equipment. Wash with a neutral soap and clean water. Do not use any
abrasive material. When the equipment becomes wet, either from being in
use or when due to cleaning, it shall be allowed to dry naturally, and shall
be kept away from direct heat.
-STORAGE: Personal protective equipment should be stored
loosely packed, in a
dry and well- ventilated place, protected from direct light, UV degradation,
dust, sharp edges, extreme temperature and aggressive substances.
REPAIR
Any repair shall only be carried out by equipment manufacturer or his
authorized representative following manufacturer's procedures.
MARKING The equipment is marked with the next information :
i ) Marked according to European Legislation
ii ) Identification of the manufacturer
iii ) Reference of the equipment
iv ) Serial number
v ) Year of manufacture
vi ) European Norm
vii) ABS - Material
viii) 55-62cm – Size of the circumference of the user's head
ix) 515g – Weight
x) -30ºC - Very low temperature
xi ) Pictogram to indicate the necessity for user to read the instruction for
use