König HC-KS32N Manual De Uso página 5

ENGLISH
The LCD will show "----" or "0g" each time Z/T is pressed. "----" means not stable, please wait
for a moment. "0g" and a "TARE" icon on the upper left corner of the LCD means the "TARE"
function is active. Maximum capacity is reduced by the total weight of all loads.
TO SET THE ALARM TIMER
1. Press T-SET to confirm and go to the next digit.
2. After setting the time span, press T-SET to start counting down.
3. Press any key to stop counting down.
4. Press T-SET to clear the time span.
5. When the timer counts down to "00:00", the alarm will start beeping 60 times and the
scale will automatically shut off.
6. Maximum time span: 99:59.
,
Press ON/OFF Press A V to set time span
Press T-SET
5