Intelbras TEX 516i Manual Del Usuario página 47

3. Press MENU/ENTER, and then press
MAT" is displayed;
4. Press MENU/ENTER, and choose from 12 hours or 24 hours, and press
MENU/ENTER to confirm;
5. Press until the message "↑↓ DATE FORMAT" is displayed;
6. Press MENU/ENTER, and choose MM/DD or DD/MM, and press MENU/
ENTER to confirm;
7. Press until the message "↑↓ TIME/DATE" is displayed;
8. Press MENU/ENTER and use the keys
month, and day, always pressing the MENU/ENTER after each adjustment
to confirm;
9. Press ESC/DIALLED to return to the main menu;
10. Press ESC/DIALLED to leave the menu.
Adjusting the FLASH TIME
1. On the rest mode, press MENU/ENTER for 3 seconds, to access the menu;
2. Press until the message "↑↓ FLASH TIME" is displayed;
3. Press MENU/ENTER, and then press
or 1000 ms;
4. Press MENU/ENTER to apply the FLASH TIME selected;
5. Press ESC/DIALLED to leave the menu.
Adjusting the LCD contrast
1. On the rest mode, press MENU/ENTER for 3 seconds, to access the menu;
2. Press until the message "↑↓ CONTRAST" is displayed;
3. Press MENU/ENTER and then press
4. Press MENU/ENTER to apply the contrast selected;
5. Press ESC/DIALLED to leave the menu.
Inserting the PABX CODE
1. On the rest mode, press MENU/ENTER for 3 seconds, to access the menu;
2. Press until the message "↑↓ PABX CODE" is displayed;
3. Press MENU/ENTER, and then press
access external lines;
4. Press MENU/ENTER to confirm the code;
5. Press ESC/DIALLED to leave the menu.
until the message "↑↓ TIME FOR-
or to adjust the hour, minute,
to choose from 100, 300, 600
to choose from 1, 2, 3, 4 or 5;
to choose the PABX CODE to
47