trating a water line causes property damage or
may cause an electric shock.
– Harmful/toxic dust may be produced during
your work (e.g. paint containing lead, certain
types of wood and metal). Inhaling or coming
into contact with this dust may represent a haz-
ard for operating personnel or persons in the vi-
cinity. Comply with the safety regulations that
apply in your country.
Wear a P2 dust mask to protect your
health.
CAUTION! Rebound!
Rotation: Switch off device immediately!
– If a tool becomes stuck in the material, it can be
removed simply by reversing the rotational direc-
tion of the machine.
– The device is not intended for use by persons
(including children) with limited physical, sen-
sory or mental ability or without sufficient ex-
perience and/or knowledge, unless they are
supervised by a person responsible for their
safety or have been instructed on how to use the
device. Children should always be supervised to
ensure that they do not play with the device.
– Do not open the battery pack or the charger!
– Prevent metal parts (e.g. metal chips) or fluids
from entering the charger!
– Do not use battery packs or chargers from other
manufacturers!
– Protect the battery pack from excessive heat > 50
°C or constant heat sources such as sunlight or
naked flames!
– Never use water to extinguish burning li-ion bat-
tery packs! Use sand or a fire blanket.
Cordless rotary hammer
Motor voltage
Idling speed
Impact energy
Collar
Tool adapter
Drill diameter max.
Steel
Wood
Hammer drilling in concrete
Weight with auxiliary handle
– Protect the machine from moisture.
– Protect the cable from heat, oil and sharp edges.
– Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Technical data
Health hazard by dust
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
WARNING
BHC 18
18V
0 - 1100 rpm
1,8 J
43 mm (1.7'')
SDS-plus
13 mm (0.5'')
25 mm (1.0'')
18 mm (0.7'')
2.6 kg (5.7 lbs)
9