Kopp 8114.0202.0 Instrucciones De Manejo página 11

G
Please read the operating instructions carefully!
Dependable function of the respective manual radio
transmitters is only ensured if these devices are
used in accordance with the following instructions.
Our instructions for use
Manual radio transmitter 8114.0202.0 3, manual
radio transmitter mini (8114.0102.9 1 / 8114.0702.5 2
/ 8114.0118.4 1):
For switching, dimming, for button and blinds control.
Manual radio transmitter for burglary alarm
(8114.0302.1) 4 with the following functions:
• Armed
5 = arms radio central burglary alarm
unit / radio alarm station
• Disarmed
6 = disarms the radio central
burglary alarm unit / radio alarm station
• Panic button
be used in conjunction with radio central burglary
alarm unit).
• Buttons 1, 2 8: For the activation of receivers for
switching, dimming, button and blinds control.
Activation possibility:
The following receivers can be activated with the
number keys of all manual radio transmitters:
(Follow separate operating instructions)
• Radio receivers (1channel - 2wire)
• Radio receivers (1channel - 3wire)
• Radio receivers (2channel - blinds/series switch)
• Radio receivers (button/timer)
• Radio receivers (phase control dimmer for
common transformers)
7 = Panic function. (Can only
• Radio receivers (phase control dimmer for
electronic transformers)
• Radio adapter (switch function)
• Radio adapter (dimmer function)
• Radio multiple socket outlet
• Radio lamp socket
• Radio central alarm unit:
- Signaling function; LED of the programmed
alarm line is switched on.
- Buttons of the manual transmitters can be
freely assigned to any line.
Note:
- No battery status notification.
- Master button „0" has no function.
- Transmitter (8114.0202.0) 3 is not possible.
• Radio central burglary alarm unit:
- Signal input function.
- Acknowledgement to alarm station/central
burglary alarm unit is necessary.
Battery replacement:
Remove lid:
For manual transmitter 4 8114.03, 2 8114.07:
• Carefully open lid on the rear with a slotted
screwdriver
For manual transmitter Mini 1 (8114.0102.9 / 8114.0118.4):
• Use size 0 Phillips screwdriver
Replace battery and close lid again.
Ensure correct battery polarity.
Do not use rechargeable batteries!
Note different battery types, see technical data for
this.
8