Kopp 8114.0202.0 Instrucciones De Manejo página 15

G
Two-button operation
Activate the desired radio receiver with „PROG"
button.
Press the first number key to be programmed (e.g.
button 1) of the manual radio transmitter, manual
radio transmitter mini, manual radio transmitter for
burglary alarm 1x.
Immediately press the second number key to be
programmed (e.g. button 2) of the same manual
radio transmitter again 1x.
Example:
• Press button 1 = 1x.
• Then press button 2 = 1x
Manual transmitter transmits two signals.
Receiver LED must blink 2x.
Programming procedure is automatically terminated.
With two-button operation, it is possible to switch
the radio receiver ON/OFF from two different activa-
tion positions (buttons) (1 = ON /2 = OFF)
Example: switching procedure (receiver switching
function):
For example, buttons 1 and 2 have been programmed.
Press button 1: radio receiver (switching function)
switches ON.
Press button 2: radio receiver (switching function)
switches OFF.
Press master button 0: radio receiver (switching
function) switches off.
Example: dimming procedure (receiver dimming
function):
Two button operation is not possible here. Please
only program 1 button
Example blinds, awning, shutter control (receiver
blinds/series function):
For example, buttons 1 and 2 have been programmed.
Radio receiver must be set to blinds mode.
Brief press of the button
Press button 1 briefly (< 400 msec):
• Blinds move to final position. (In this example
upwards)
Press button 2 briefly (< 400 msec.):
• Blinds move to final position. (In this example
downwards)
Press master button „0" during blinds movement:
• Radio receiver (blinds function) switches OFF,
blinds stop.
Reversing direction:
The direction of the movement of the blinds can be
changed during operation.
The blinds stop briefly in order to protect the gearbox.
There is a pause of 200 msec before the change in
direction. (Follow separate operating instructions).
Long press of the button
Press button 1 and hold:
• Blinds move upwards as long as the button is pressed
Press button 2 and hold:
• Blinds move downwards as long as the button is pressed
Example button control (receiver button/timer):
Two-button operation is not sensible here. Both
buttons are equal, meaning they lead to the same
reaction of the receiver.
12