Standard Accessories - Hitachi WH 14DBEL Instrucciones De Manejo

6. Do not use the battery for a purpose other than
those specified.
7. If the battery charging fails to complete even
when a specified recharging time has elapsed,
immediately stop further recharging.
8. Do not put or subject the battery to high
temperatures or high pressure such as into a
microwave oven, dryer, or high pressure container.
9. Keep away from fire immediately when leakage
or foul odor are detected.
10. Do not use in a location where strong static
electricity generates.
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the
equipment or battery charger, and stop use.
SPECIFICATIONS
POWER TOOL
Model
Voltage
No-load speed
Ordinary bolt
Capacity
High tension bolt
Tightening torque (Maximum)
2LLRK
Rechargeable
2LSRK
battery
2LBGK
Weight*
* Weight: According to EPTA-Procedure 01/2003
CHARGER
Model
Charging voltage
Weight
WH14DBEL
BSL1440: Li-ion14.4 V (4.0 Ah 8 cells)
BSL1430: Li-ion14.4 V (3.0 Ah 8 cells)
1.5 kg (With BSL1440 attached)
UC18YRSL, UC18YFSL,
UC18YGSL, UC18YML2
14.4 V – 18 V
UC18YRSL: 0.6 kg
UC18YFSL: 0.5 kg
UC18YGSL: 0.4 kg
UC18YML2: 0.7 kg
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
14.4 V
0 – 2900 min
M5 – M14
M5 – M12
160 N·m

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the
accessories listed in the table below.
WH14DBEL
WH18DBEL
WH14DBEL (NN) Wituout chager, battery, plastic case
WH18DBEL (NN) and battery cover.
Standard accessories are subject to change without
notice.
The charger and battery supplied are different depending
on the set specification.
WH18DBEL
18 V
–1
165 N·m
BSL1840: Li-ion 18 V (4.0 Ah 10 cells)
BSL1830: Li-ion 18 V (3.0 Ah 10 cells)
BSL1820: Li-ion 18 V (2.0 Ah 5 cells)
1.6 kg (With BSL1840 attached)
1 Plus driver bit (No. 2) ...................... 1
2 Charger ............................................. 1
3 Battery .............................................. 2
[WH14DBEL] BSL1440 or BSL1430
[WH18DBEL] BSL1840 or BSL1830 or BSL1820
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
English
9