Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 301B Manual De Instrucciones

Product Safety Information

Intended Use:
These die grinders are designed for grinding, porting, polishing, de-burring and breaking
sharp edges.
For additional information refer to Air Die Grinder Product Safety Information Manual
Form 04580288.
Manuals can be downloaded from www.ingersollrandproducts.com

Product Specifications

Free
Collet Size
Speed
Model(s)
rpm
301B 21000 1/4" (6 mm)
307B 28000 1/4" (6 mm)
302B 20000 1/4" (6 mm)
308B 25000 1/4" (6 mm)
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
*K = Vibration measurement uncertainty

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573164 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
48483689_ed1
Sound Level dB(A)
(ISO15744)
† Pressure
mm
(L )
p
---
83.0
90.0
92.0
Sound Level dB(A)
(ANSI S5.1-1971)
‡ Power † Pressure
(L ) (L )
w p
--- 91.8
94.0 ---
101.0 ---
103.0 ---
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease
Vibration (m/s²)
(ISO28927)
‡ Power
Level
(ISO3744)
104.8 5.9
--- 4.5
--- 5.5
--- 3.7
EN
*K
1.0
1.1
1.5
1.2
EN-1