Eneo EDC-IPS-2/24V Instrucciones De Manejo página 13

NOTE: The ceiling tile cannot be thicker than 2.4cm.
Step 1
Remove the ceiling tile from the ceiling. Draw a circle whose diameter is 84mm n the tile (you can use the carton with a hole).
Cut the circle out of the ceiling tile.
Step 2
To install the dome camera, fasten the dome mounting base to the base bracket using 3 screws.
Step 3 Insert the flush mount into the ceiling and turn the lever clamp to fasten the flush mount to the ceiling.
Step 4 It is recommended to remove window for improving picture quality.
Step 5 Join the dome camera to the dome mounting base.
Step 6 Insert dust cover ring inside guide bracket to prevent housing dome covering with dust.
Step 7 Fix the trim ring to the flush mount.
NOTE: To increase the safety, screw safety ring string to the guide bracket and the other side
of that to something which can prevent falling incidently.
No. Quantity Component
  Trim ring
  Base bracket
3 3 Guide bracket
4 3 Lever clamp
5  Dome ring
6 6 Screws
7 3 Screws
8  Screws
9 3 E-rings
0  Housing dome (tint)
  Dust cover ring
 3 Spacer
3 6 Screws
Accessories
  Safety ring string
  Self tapping () screws
3  Self tapping () screw
3
Description
Plastic
Steel (EGI .6T)
Steel (EGI .0T)
Aluminium
Steel (EGI .6T)
Self tapping M4xmm
M4x55mm
M4x6mm
4mm
Acrylic
Sponge
M4x5mm
M3xmm
M4xmm
M4xmm