Customizing Tv Settings; Initial Setup - Westinghouse WD65NH4190 Manual Del Usuario

CUSTOMIZING TV SETTINGS

Initial Setup

‡ Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
‡ In Standby Mode, press the
turn the TV on. The red LED indicator will turn blue.
‡ The first time you turn the TV on, it will go into the Setup Wizard. Press
buttons to select your desired mode and press OK to
Found : 0
Home Mode:The picture mode will be Standard if you select this mode.
Retail Mode:Select Dynamic Mode if you would like your picture to be brighter. At times this mode may use more energy to
operate the Volume/Sound Mode and Picture Mode.
‡ The ON-MODE Power under Home Mode shoul
‡ The SLEEP-MODE Power should be less than 0.5 W.
En
10
button on the main unit or on the remote control to
7
be less than 65" 200W.
Power On Mode
Home Mode optimizes the standard video settings.
Use the UP and Down arrows on your remote control or TV keypad
to select power on mode .
Home Mode
Retail Mode
5
Check your antenna or cable connections
andtry again
8
‡ If channels can not bH
found, this frame will EH
GLVSOD\HG DXWRPDWLFDOOy
9