Alesis FUSION 6HD Manual De Inicio Rápido Para El Usuario página 19

Editing Sounds
The Fusion's Control Knobs make it easy to tweak your sounds.
First, let's select a sound:
1. Press PROGRAM.
This takes you to Program mode on the Fusion. If you are already in Program mode, pushing
this button again will return you to the "top level" of the mode.
"◄ Bank"
2. Press the or
corner of the screen.
The Fusion can store sounds in a virtually unlimited number of banks. You have to make sure
you've loaded the right bank otherwise you'll find yourself loading unfamiliar programs.
3. Press "E" and then "5" from the quick-access buttons on Control Panel.
This loads program E-5, or "Taurus The Bull."
Your display should now look like the screen below:
Now press the EQ button on the Performance Grid. The bottom of your display will look like
the screen below.
Your four Control Knobs now correspond to Low, Low Mid, High Mid, and High EQ
respectively. As you play the bass sound and rotate the Low EQ knob clockwise, you can hear
the bass sound gain more fullness, or bottom end.
Similarly, you can press the Filter button to the right of the Grid on the Fusion's Performance
Panel and your screen will look like the screen shot below. Now, the Control Knobs represent
a different set of parameters—in this case, the Filter.
"Bank ►" "[ROM: Preset 3]"
until you see on the upper left
17