Main Unit - Panasonic EY7441 Manual De Instrucciones

VII. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or
●
other volatile solvents for cleaning.
In the event that the inside of the tool or battery pack is exposed to water, drain and allow
●
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
VIII. ACCESSORIES
Use only bits suitable for size of drill's chuck.
IX. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model
Machine screw
Screw
driving
Wood screw
Self-drilling screw
For Wood
Drilling
For Metal
For Masonry
X. SPECIFICATIONS

MAIN UNIT

Model
Motor voltage
Low
No load
speed
High
Low
Blows Rate
Per Minute
High
Chuck capacity
Clutch torque
Overall length
Weight (with battery pack EY9L44) 1.75 kg (3.86lbs) 1.8 kg (3.97lbs) 1.85 kg (4.08lbs)
Weight (with battery pack EY9L45) 1.75 kg (3.86lbs) 1.8 kg (3.97lbs) 1.85 kg (4.08lbs)
Weight (with battery pack EY9L50)
Weight (with battery pack EY9L51)
EY7441
–
EY7441
14.4 V
-1
70~400 min
-1
200~1400 min
1260~7200
–
min
3600~25200
–
min
ø1.5 mm - ø13 mm (1/16"-1/2")
Approx 0.5N m- Approx 1.0N m-
4.4Nm
(4.3in-lbs -
(8.7in-lbs -
39in-lbs)
193 mm (7-5/8") 200 mm (7-7/8")
–
–
- 17 -
EY7940
M5
ø6.8 mm (17/64")
ø6 mm (15/64")
ø35 mm (1-3/8")
ø13 mm (1/2")
ø13 mm (1/2")
EY7940
14.4 V
50~480min
(rpm)
(rpm)
130~1400min
(rpm)
(rpm)
-1
(rpm)
-1
(rpm)
Approx 0.5N m-4.4Nm
4.4Nm
(4.3in-lbs - 39in-lbs)
39in-lbs)
–
–
EY74A1
–
EY74A1
18 V
-1
80~600min
(rpm)
-1
220~1750min
(rpm)
– –
– –
203 mm (8")
–
–
1.95 kg (4.30lbs)
–
1.95 kg (4.30lbs)
–
-1
-1