Technical Safety; Correct Use - Miele SEB 216 Electro Comfort Instrucciones De Manejo

Technical safety

~
Before using the Electrobrush for the
first time, ensure that the connection
data on the vacuum cleaner's data
plate (voltage and frequency) match
the mains electricity supply. It is
essential that they match to avoid
damage to the vacuum cleaner and the
Electrobrush.
~
Check the Electrobrush, electro-
suction hose and electro-telescopic
tube for any visible signs of damage
before use. Do not use if damaged.
Damaged components could be
dangerous.
~
While under guarantee, repairs
should only be undertaken to the
Electrobrush, the electro-suction tube
and the electro-telescopic tube by a
service technician authorised by Miele.
Otherwise the guarantee will be
invalidated.
~
Switch off the vacuum cleaner when
you have finished using it, as well as for
maintenance work and cleaning. Switch
the cleaner off at the wall socket and
unplug it.
~
Do not let the vacuum cleaner or the
Electrobrush get wet. Clean only with a
dry cloth or slightly damp cloth when
disconnected from the mains supply. If
moisture gets into either the vacuum
cleaner or the Electrobrush, there is a
risk of electric shock.
~
The electro-suction hose and the
electro-telescopic tube contain
electrical wires. The plug connectors
must not come in contact with water.
Danger of electric shock. They should
only be cleaned with a dry cloth.
en - Warning and Safety instructions
~
a Miele authorised service technician.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.

Correct use

~
is rotating. Danger of injury.
~
level. Long hair, ties, scarves etc. could
be sucked in and become entangled in
the roller brush.
~
curtains, clothing etc, as these could
be vacuumed in and become
entangled in the roller brush.
~
heavy, hard or have sharp edges. The
vacuum cleaner and Electrobrush can
become blocked and damaged.
~
whether glowing or apparently
extinguished. The Electrobrush and the
vacuum cleaner might catch fire.
~
or combustible liquids or gases and do
not vacuum in areas where such
substances are stored. Danger of
explosion.
~
or damp dirt. Doing so would cause
major faults. It could also seriously
impair the functioning and electrical
safety of the vacuum cleaner. Wait until
any freshly cleaned or shampooed
carpets or floor coverings are
completely dry before attempting to
vacuum.
Repairs should only be carried out by
Never touch the roller brush while it
Do not use the Electrobrush at head
Keep the Electrobrush away from
Do not vacuum up items which are
Do not vacuum up ashes or coal,
Do not vacuum up any inflammable
Do not vacuum up any water, liquid
9