Important information
• Please read the following instructions carefully,
and retain this booklet for future reference.
• Each video source, the main TV and the second TV must have
SCART connectors.
• Two SCART cables are supplied; you will require additional SCART cables
for the video sources you connect.
• A video source can be any satellite receiver, Pay-TV decoder box
(digital or analogue), video recorder (VCR), DVD player, camcorder,
game-console, PC with TV-out capability, etc.
• In these instructions for use we refer to the connected TV's as follows:
- TV1 - The main TV, connected to the transmitter unit of the
Wireless TV link VL1400.
- TV2 - The second TV, connected to the receiver unit of the
Wireless TV link VL1400.
- TV3 - The third TV, connected to the VL1405 receiver.
• It may be helpful to have the instructions for use for the TVs and the
video sources at hand for reference.
Note:This product will not operate remote control signals (IRDA) of set-top
boxes providing NTL or Telewest cable TV services. A similar issue may
arise in the unlikely event that other service providers use the
IRDA signals. Please check with your service provider.
Safety precautions
• Do not use this product in damp places or close to water.
• Do not expose this product to extreme heat.
• Do not open this product.
In the event of technical difficulties take it to your Philips retailer.
• Do not cover this product.
• Only connect the AC power adapters to a power supply of
220-240 V AC/ 50Hz.
• Only use the AC power adapters included or a type that complies with
safety standard EN60950 and that has the following specification:
12 V DC/ 500 mA.
• Inadequately protected or sensitive electronic equipment may be affected
by the use of this product.This interference may lead to damage to either
equipment. Please check whether or not surrounding equipment may be
affected by this product before you start using it.
Packaging contents
Please check that the following items are packed in the Wireless TV Link
receiver box.They are provided to help you set up and use your Wireless
TV Link receiver.
• Receiver unit
• AC power adapter
• SCART/RCA audio/video cable
• Instructions for use
ENGLISH
5