Dear Customer,
Thank you very much for purchasing one of our appliances. It is very easy to use however you are
advised to carefully read these instructions on installation and use in order to ensure optimum results.
Receipt and unpacking:
Any damage due to transport must be informed to the transport company by recorded post with
acknowledgement of receipt within 24 hours of receipt. You must also state your reservations on the
transport company's receipt and describe the damage ascertained on delivery in detail.
This appliance must be installed and adjusted (change of injectors) by fitters or technicians qualified
for gas equipment.
Ventilation of the premises
The appliance must be installed and only operate in premises with permanent ventilation in
compliance with the regulations in force.
- This appliance has been designed to operate with butane or propane gas cylinders and also from
a natural gas supply.
- Choose a surface made of stainless steel or any other fire retardant material in compliance with the
hygiene standards.
- The appliance must be installed at a minimum of 5 cm from any partition, no partition element must
be in contact with the appliance.
- The openings on the frame must not be obstructed.
- The underneath of the appliance must remain ventilated in order to ensure correct air circulation to
the burner.
- For outdoor use, avoid areas exposed to draughts while adhering to the recommendations laid
down in the instructions.
- Recommended height for hot plate: 85 from 95 cm from the ground for a good working position.
- Store your plancha in a dry place when not in use.
- Check the hose (NF or CE) is in good condition. Do not hesitate to change it if in doubt.
- Check the expiry date of the hose.
- Do not twist the hose and keep it away from any parts likely to be hot.
KEEP THESE INSTRUCTIONS
- 11 -