Operation
Using a Bluetooth Device
W
X
al
U
V
10
at
11
12
— E6 —
6
Make sure the Bluetooth device
has its volume set to mid range,
then adjust the volume to a
comfortable level using the
MASTER VOLUME control.
7
Connect microphone(s) and slide
the microphone's ON/OFF switch
to the ON position. Also, if desired,
place your Bluetooth device onto
the cradle after it is paired.
8
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of the
respective microphone.
9
ECHO: Adjust the ECHO control to
add an echo effect to your voice.
BALANCE: Balance allows you to
eliminate the lead singer's voice by
rotating the knob to the left when
playing a multiplex recording, or
eliminate the music by rotating the
knob to the right. This feature only
works with multiplex media.
Note: If not listening to a multiplex
recording, this knob will control the balance
on the left and right speakers.
Control the Bluetooth device using
its own controls.
Press the Power ON/OFF button
to turn the unit off; the Power
indicator will turn off.