Peaq PMS300 Manual De Instrucciones página 47

ENGLISH
iPhone/iPod playback
Amplifier unit must be in iPhone mode to run
iPhone operation. Use buttons on remote
control or use respective operating elements
on the front panel of the appliance.
iPHONE
Press iPhone to play music from the con-
nected iPhone/iPod.
NOTE: Make sure the iPhone/iPod is con-
nected correctly to the iPhone dock.
MENU
Press MENU to access the menu of your
iPhone/iPod.
While in menu, press MENU to go to the
previous menu.
UP / DOWN
Press to go up and down in the iPhone/
iPod menu.
PLAY / PAUSE
Press once to start playback. To pause
the playback temporarily, press
more; sound will be muted. To resume,
press again.
Alternatively press ENTER on the front pa-
nel.
ENTER
Press ENTER to confirm a selection in the
iPhone/iPod menu.
REPEAT
During iPhone/iPod playback, press
REPEAT repeatedly to activate the following
repeat functions:
– Repeat Title
– Repeat All
– Repeat Off
SKIP
1. Press SKIP+ once to skip to the next
track.
2. Press SKIP- once to skip to the begin-
ning of the current track.
3. Press SKIP- twice fast to skip to the pre-
vious track.
once
46