Installation; Installing The System - Sherwood S9 Instrucciones De Funcionamiento

Installation

Installing the System

To Install on a shelf
You can install the main unit on a shelf. Place
the main unit at a height close to ear-level in
the listening area.
When installing the main unit, use a stable
surface to avoid accidents or injury.
To Install on a Wall
You can install the main unit on the wall. Before
installation, see "CONNECTIONS" on page 12
and complete the wiring connections.
600 mm
4-5 mm
10
Caution
• When the main unit is installed on a
wall, its weight could cause the screws
to come loose over time, or it may not
be adequately supported by the wall,
resulting in the unit falling. Make sure that
the wall you intend to mount the unit on is
strong enough to support it. Do not mount
on plywood or soft surface walls. If you
are uncertain of the wall quality, consult a
professional for an advice.
• Sherwood is not responsible for
any accidents or damage that result
from improper installation, misuse or
modification of the product, or from
natural disasters.
• Mounting screws are not supplied. Use
screws suitable for the wall material and
that can support the weight of the unit. It
is recommended to use 2 inch (50 mm)
long screws.
• The main unit is magnetically shielded.
However, depending on the installation
location, color distortion may occur if the
main unit is installed extremely close to
the screen of the TV. If this happens,
turn the main unit off, and turn it on after
15 minutes. If the problem persists, move
the main unit further from the TV.
5 mm
10 mm