Peg-Perego Navetta Elite Instrucciones De Uso página 16

Always apply the brakes on the stroller or chassis before
attaching and removing the Navetta Elite.
Check that the bassinet unit is properly attached.
• To release it, raise the lever of the Ganciomatic clip
(arrow_a) and lift up the Navetta Elite (arrow_b).
Removing the lining
14 REMOVING THE HOOD LINING:
- Release the buttons on the side and back of the bassinet
(fig_a)
- Press the hood's attachments (fig_b) and release it
upwards (fig_c).
15 Remove the fabric from the handle to facilitate removal
of the lining (fig_d), and then remove the hood's rigid
components (fig_e).
16 REMOVING THE NAVETTA ELITE INNER LINING:
- Unbutton the foot muff, if attached, and remove it.
- Unfasten all the buttons on the side of the bassinet.
- Lift the inner lining off the backrest and remove the fabric
from the top.
17 REMOVING THE NAVETTA ELITE OUTER LINING:
- Unfasten all the rubber bands as illustrated.
- Remove the outer fabric.
18 WARNING: when replacing the outer lining of the
bassinet, ensure you fit it on correctly with all external
components left on the outside, i.e.:
rings for fastening the vehicle kit (fig_a),
handle for adjusting the backrest (fig_b),
release handles (fig_c).
19 When placing the lining on the hood, ensure you insert the
rigid supports correctly. Insert the tube bearing the carry
handle into the hood's front slot, ensuring the handle is
centred correctly (fig_a). Pull the flap of fabric out from the
opening on the hood (fig_b) and slide it under the handle
(fig_c).
20 Finally, slip the second metal support into the hood's inner
slot.
21 Push the hood's metal supports into the relevant slots and
fasten the buttons.
Padding cleaning instructions
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the carrycot.
Accessories
22 COVER ALL RAIN CANOPY: made of clear.
23 BAG: satchel with pad for changing baby's diaper. Fastens
to the chassis.
24 AUTO KIT: Request the auto kit (ECE R44/04 certified),
which contains everything you need for mounting the
bassinet unit in your car.
25 BASSINET STAND: Practical, compact support base.
26 COMPLETO TRASPIRANTE: mattress plus cushion.
Compatible with our 3-point car kit.
Serial numbers
27 Information about the production date of Navetta Elite can
be found under the base.
• Product name, production date and serial number.
This information is required for any complaints.
16