Connecting To A Display Using The S-Video Output - SpectronIQ PD-1100 Manual Del Usuario

Connecting the Player to Other Devices
VIDEO
L
AUDIO
R
Y
L
AUDIO OUTPUT
(OPTIONAL)
VIDEO
Pb Pr
~100
R S-VIDEO
COAXIAL VIDEO OUT
10
Connecting to a Display Using the
S-Video Output
S-Video provides better image quality
than composite video, but lower image
quality than component video. It is
available on most displays.
Note: The pins used in S-Video connectors
are fragile. Use care when handling
S-Video cables to avoid bending or
breaking pins.
To connect to a display using S-Video:
1. Using an S-Video cable, connect the
S-VIDEO output on the player to the
S-Video input on the display.
2. (OPTIONAL) To connect the audio
output to the display as well, use the
red (left) and white (right) connectors
on the included audio/video cable to
connect the AUDIO OUT jacks on the
rear of the player to the display's audio
input.
3. Select CVBS+S-Video as the Video
Output setting under the Screen Setup
menu on the player (see "Configuring
the Player" on page 58).
4. Select the appropriate TV Type setting
under the Screen Setup menu.