Rack Models - MGE UPS Systems Pulsar Evolution Serie Manual De Instalación, Usuario

Rack models

Removal of the battery module
This operation may be carried out with the UPS supplying power to the load.
A R
L S
o n
P U
lu ti
E v o
0 0
1 5
C
B
A
D
4. Maintenance
A - Unclip the small plate with the MGE
logo on the front panel of the UPS.
B - Remove the two screws.
C - Remove the left-hand side of the front
panel by pulling it forward.
D - Disconnect the battery module by
pulling apart the connectors (never pull on
the cables).
34007117EN/AB
- Page 25