Cleaning & Maintenance - tomado TBT2002S Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
The toaster can automatically compensate the heat. This means that when you directly toast another slice of bread, the toaster
calculates the temperature of the device and adjusts the toasting time. This will ensure that your second slice of bread has the
same browning as the first one.
With the DEFROST function you can defrost and toast bread at the same time.
• Adjust the browning control with the control
• Place the frozen bread in the toasting slot and push the lever down.
• Press the DEFROST button. The indicator lights in the buttons DEFROST and CANCEL will light up.
• The bread will be defrosted and then toasted.
If you would like to reheat the bread, after it has been toasted, press the REHEAT button.
• Place the bread in the toasting slot and push the lever down.
• Press the REHEAT button. The indicator lights in the REHEAT and CANCEL button will light up.
• The bread will be reheated. It is not necessary to set the browning control.
You can stop any process, toasting, reheating and defrosting, by pressing the CANCEL button.
The appliance will automatically switch off and the lever will return to it's original position, lifting the toasted slices.
The toasting time depends on the dampness of the bread and the thickness of the slice. If you only place one slice into the
toaster, it is possible that with the same setting the slice will brown more. Select a lower setting of the browning level.
If for whatever reason, a piece of bread is caught into the toasting slots, do not try to remove it immediately. Use the hi-lift
function to lift the piece of bread higher to remove it easier. If this does not work, unplug the toaster and leave it to cool down
first. Than try to remove the piece carefully without touching the heatingelements.
Place the separate warming rack on the toaster to warm larger buns.
• Place the bread to be warmed on the warming rack and push down the bread carriage lever.
• Press the WARM button. The indicator lamps in the WARM and STOP buttons will light.
• The bread will be warmed. The position of the toasting level knob has no effect.
• Interrupt warming by pressing the STOP button.
Always unplug the appliance before cleaning. Wipe the outside of the housing with a damp cloth and dry.
Never use any abrasives! Never immerse the appliance into water or other liquids.
Remove the crumbtray at the bottom of the toaster for easy cleaning of the inside. Pull the
crumbtray carefully at the handle from the side of the toaster. Remove the crumbs and clean the
crumbtray with a damp cloth. Slide the crumbtray back into the toaster after cleaning. Check the
correct placement of the crumbtray before re-use.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the applicable rules in your country for the separate collection of electric and electronic products.
By disposing of the product correctly, you prevent negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
knob.
CLEANING & MAINTENANCE
RECYCLING
EN - 12

Publicidad

Tabla de contenido
loading

Tabla de contenido