Nvidia 3D Vision Shutter Glasses Kit - Clevo P370EM Manual Del Usuario

NVIDIA 3D VISION Shutter Glasses Kit

(For Model B Computers Only)
The NVIDIA 3DVISION shutter glasses kit is supported
only by Model B computers with a 17.3"(43.94cm) FHD
120Hz panel.
The NVIDIA 3DVISION shutter glasses kit is supplied
with a single pair of shutter glasses and all necessary ca-
bles etc. Set up the hardware (run the set up wizard as in-
dicated on page 19) as instructed in the manual supplied
with the kit, however make sure you have installed the
NVIDIA driver (see NVIDIA Video (VGA) on page
from the Device Drivers & Utilities + User's Manual
disc. For further details contact your service center.
Important Safety Instructions
Make sure you read all the enclosed safety instructions and
precautions included in the NVIDIA 3D Vision Kit before set-
ting up the 3D Glasses and IR Emitter. Follow the setup in-
structions provided in the documentation to set up the 3D
Vision kit safely and take the "User Vision Test," which will
initiate when you turn on your GeForce 3D Vision for the
first time. If you cannot see the image in 3D during the test,
you should DISCONTINUE USE IMMEDIATELY. Contin-
ued use may result in health-related complications.
18

Stereoscopic 3D Hardware Setup
This computer (Model B Computers Only) features a
built-in 3D IR emitter. The effective viewing angles of
the emitter are illustrated in
sure that you are viewing the notebook screen within the
area highlighted in order to get the proper stereoscopic 3D
effect.
24)
Figure 12 -
Figure 14 on page
3D Icon
IR Emitter Location
IR Emitter Location
19. Make