Trusted Platform Module; Activating Tpm; Tpm Driver Installation - Clevo P370EM Manual Del Usuario

Trusted Platform Module

Before setting up the TPM functions you must initialize
the security platform.

Activating TPM

1. Restart the computer.
2. Enter the Aptio Setup Utility pressing F2 during the POST.
3. Use the arrow keys to select the Security menu.
4. Select TPM Configuration and press Enter.
5. Select TPM Support and press Enter. Select Enable and press
Enter.
6. Select TPM State, press Enter and select Enable to change the
TPM state to enabled. You will then need to press F4 to save
the changes and restart the computer.
7. As the computer restarts press F2 to enter the BIOS again and
go to the TPM Configuration menu.
8. Select Pending TPM operation, press Enter and select the
option you require (if you are initializing TPM you should select
Enable Take Ownership). You will then need to press F4 to
save the changes and restart the computer.
9. You can now install the TPM driver and then initialize the
TPM.

TPM Driver Installation

1. Click Option Drivers (button).
2. (Win 7) Click 5.Install TPM Driver > Yes.
(Win 8) Click 4.Install TPM Driver > Yes.
3. Click Install > Next.
4. Click the button to accept the license and click Next.
5. Click Next > Next > Install.
6. Click Finish > Yes to restart the computer.
31