Troubleshooting
Problem
The Wireless LAN/Bluetooth
modules cannot be detected.
The PC Camera module
cannot be detected.
The captured video files from
the PC Camera are taking up
too much disk space.
The computer is off (or in
Sleep Mode) but powered by
the AC/DC adapter plugged in
to a working outlet or powered
by the battery with a capacity
level above 20%. I have
plugged a device into the
powered USB port in order to
charge it, but the device is not
charging.
40
The modules are off as the computer is in Airplane Mode. Check the LED indicator
is in Airplane Mode (see
Table 3 on page
Airplane Mode on/off (see
Table 4 on page
The module is off. Press the Fn + F10 key combination in order to enable the module (see
on page
10). Run the camera application to view the camera picture.
Note that capturing high resolution video files requires a substantial amount of disk space for each
file.
Note that the Windows system requires a minimum of 20GB (64bit) of free space on the C: drive
system partition. It is recommended that you save the capture video file to a location other than the
C:drive, limit the file size of the captured video or reduce video resolution.
The port is not powered on. Toggle power to the port using the Fn + power button combination.
This function may not work with certain external USB compliant devices (check your device's
documentation). If this is the case, power the computer on and connect the external USB
device in order to charge it.
Possible Cause - Solution
9). Use the Fn + F11 key combination to toggle
10).
to see if it
Table 4