Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Troubleshooting

Problem
The Bluetooth module is off after
resuming from Sleep.
The captured video files from the PC
Camera are taking up too much disk
space.
The computer is off (or in Sleep
Mode) but powered by the AC/DC
adapter plugged in to a working
outlet or powered by the battery with
a capacity level above 20%. I have
plugged a device into the powered
USB port in order to charge it, but
the device is not charging.
I previously turned off the WLAN
module using the Fn + F11 key
combination (or Windows Mobilty
Center button), but upon returning
to the machine the LED indicator
shows the WLAN module is ON.
20
The Bluetooth module's default state will be off after resuming from the Sleep power-saving
state. Use the key combination (Fn + F12) to power on the Bluetooth module after the
computer resumes from Sleep.
Note that capturing high resolution video files requires a substantial amount of disk space for
each file.
Note that the Windows system requires a minimum of 15GB of free space on the C: drive
system partition. It is recommended that you save the capture video file to a location other
than the C:drive, limit the file size of the captured video or reduce video resolution.
The port is not powered on. Toggle power to the port using the Fn + power button
combination.
This function may not work with certain external USB compliant devices (check your device's
documentation). If this is the case, power the computer on and connect the external USB
device in order to charge it.
The computer entered a power saving state with the WLAN Switch in the ON position, and
upon resuming from the power saving state the WLAN module turned ON. The position of
the WLAN switch governs the power status of the WLAN module at startup, and upon
resuming from a power saving state. This is the case even if you have previously turned the
module off using the Fn + F11 key combination or Windows Mobilty Center button prior to
the computer entering a power saving state.
Possible Cause - Solution

Publicidad

Capítulos

Solución de problemas

loading