POWER
To follow the correct power-down procedure is quite
important to the PAA3. The easiest way to do so, however,
is to hold the POWER / BACKLIGHT button of the PAA3
for approximately 2.5 seconds.
The device will automatically shutdown. If that's too easy,
and you prefer to do things the difficult way, you may also
do one of the following:
POWER
AUTO OFF
MANUAL OFF
OFF
ESC
A 31
100 315 1K
Procedure:
Enter the POWER menu.
1.
Select AUTO OFF, and the PAA3 will automatically
2.
shut itself down after being left idle for 15 minutes.
Selecting MANUAL OFF will disable AUTO OFF
3.
mode, and ensure the PAA3 will not shut itself down
automatically, unless the batteries are low.
Select OFF, and the PAA3 will immediately shut down,
4.
saving all of your settings and measurement data
before hand.
14
3.15K
10K
PAA3