Magnat WSB 25 Manual De Instrucciones página 11

OPERATION
Operating elements of the Soundbar (front) (fig. 4):
(7) ON/STBY button with LED status indication: This button can be used to switch between the standby and operating modes.
This function is also possible via the remote control. The standby mode is indicated by the red illuminated symbol. The
operating mode is indicated by the input select button (9) illuminating. The button symbol illuminates green when a Dolby
Digital signal is being decoded via the digital input or the HDMI input.
(8) Volume buttons: (+-): Increases (+) or decreases (-) the volume.
(9) Input selector switch: Input select button: Switches between the various inputs:
HDMI 1: Button symbol H illuminates orange
HDMI 2: Button symbol H illuminates blue
Analogue: Button symbol A illuminates blue
Digital: Button symbol D illuminates blue
(10) 3D Surround button: Switches the 3D surround sound function on or off. When this function is active the symbol turns blue.
(11) Sensor for the remote control: Please aim at this sensor when using the remote control.
Operation with the system remote control (fig. 5):
(12) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation
to the standby mode.
(13) MUTE: Switches the sound on and off.
(14) VOLUME: Increases (+) or decreases (-) the volume.
(15) SUB: Increases (+) / decreases (-) the volume of the subwoofer.
(16) Source (Input selector switch): Switches between the different inputs.
(17) 3D Surround button: Switches the 3D surround sound function on or off.
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or Magnat Audio-Produkte GmbH,
Tel.: 02234807-0.
SPECIFICATIONS
Configuration:
Output power RMS/Max.:
Frequency range:
Cross-over frequency:
Dimensions (WxHxD):
Weight:
SUBJECT TO TECHNICAL CHANGE
2 x 2 way
80/160 watts
35 — 25000 Hz
180 Hz, 4000 Hz
895 x 96 x 90 mm
4.1 kg
11