Changing The Operating; System Settings - Hama New Basic Instrucciones De Uso

Changing the operating language
The operating language is set to German („Deutsch") at the factory. To
change this setting, proceed as follows:
‹ Press the SETUP button on the remote control.
‹ Select "Language" and then the desired operating language, and
‹ Exit the menu by pressing the EXIT button on the remote control.

System settings

Select SETUP from the main menu and confirm with ENTER to open
the system menu. The following menu items are available:
Language
Slideshow
time
Slide show
mode
Display Mode
Brightness
Contrast
Colour satu-
ration
Split screen
function
Default
00095220man.indb 36
confirm your selection by pressing the ENTER button.
Select the desired language menu/operating language
Select the time interval at which you want the photos
to change (3/5/15 sec.; 1/15/60 min.)
Function menu for setting the image transitions
Adjusting the image to the screen
Setting the brightness, of the device
Setting the contrast of the device
Setting the saturation of the device
Display up to four images simultaneously
Function menu to reset to factory settings
GB
36
19.08.14 13:05