Power Indicator - Pioneer XW-BTSP70 Manual De Instrucciones

Advanced instructions
English

Power indicator

0 (When running on the battery) The indicator lights green when the
power is turned on. It turns red when the remaining charge in the
battery becomes low. It goes out when the unit is on standby.
0 (During recharging) The indicator blinks either red (when battery charge
is low) or green, irrespective of whether the unit is on or on standby. The
indicator turns green when recharging is complete.
0 When the battery runs out of charge, the indicator blinks alternating
between red and green.
Regarding the pairing
0 The pairing mode takes about 5 minutes.
0 This unit can store the data of up to eight paired devices. The
information for the oldest paired device is deleted when you try to pair a
ninth device. The procedure for pairing for other devices is the same as
for the first device.
8
0 All pairing information is deleted if you press and hold the
10 seconds or more. To pair a device again, first delete the pairing
information for the unit on the Bluetooth enabled device.
Regarding the playback
0 If the volume setting on the Bluetooth enabled device is low, the sound
will not be output from this unit, so adjust the volume to an appropriate
level.
0 If the unit receives no input signal for 20 minutes, it switches to standby
automatically (auto-standby feature). If there is no Bluetooth connection
with the unit for 5 minutes, it also switches to standby automatically.
0 If you are playing at near the maximum volume and the battery charge
becomes low, the volume is automatically reduced.
0 Due to the characteristics of Bluetooth wireless technology, the sound
produced on this unit may slightly be behind the sound played on the
Bluetooth enabled device.
button for