Cd Maintenance & Safety; Cleaning Cds - Coby CSMP142 Manual De Instrucciones

CD Maintenance & Safety
operating Precautions and general
Maintenance
Place the device on a hard, flat surface only.

Do not expose the device, its batteries or CDs to

moisture, dirt or excessive heat.
Do not block ventilation. A gap of at least 15 cm must

be kept between the ventilation openings and the
surrounding surfaces to ensure proper ventilation
and avoid overheating.
All mechanical components are self-lubricating and

do not require grease.
Use a soft and dry cloth

to clean the unit. Do
not use cleaning agents
containing alcohol,
ammonia, benzene or
other abrasives, which
may damage the device.

Cleaning CDs

Use a soft and clean cloth to wipe away fingerprints

or dust from the surface of the disc. Wipe in a straight
motion from the center to the edge. Very small dust
particles and slight will not affect the sound quality.
Never use chemical products such as sprays for con-

ventional (vinyl) records, anti static aerosols, benzene
or thinners to clean your CDs.
www.cobyusa.com Page 19