Midea MPM3-10CR-BB6 Manual De Instrucciones página 8

AiR CONDITIONER FEATURES
(_UP{A) and DOWN(Y) button
Press to decrease Press to increase
o o o
LOW 0
HU 0
TEHP
SE_SINe
NOTE:
Press or hold either UP or DOWN button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62°F(17°C) and
88°F(30°C). If you want the display to read the
actual room temperature, see" To Operate on
Fan Only" section.
The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius. To
convert from one to the other, press and hold the
UP and DOWN buttons at the same time for 3
seconds.
{_ TIMER button
0
0
Au'ro
0
0 cool
0
_r_v
FA_
0 0
TI_ER O_ TIMER OFF
%
NOTE:
• When the unit is on, first press the Timer button,
the indicator light above word TIMER OFF illu-
minates. It indicates theAuto Stop program is
initiated.
• When the unit is off, first press the Timer button,
the indicator light above word TIMER ON illu-
minates. It indicates theAuto Start program is
initiated.
• Press or hold the UP arrow or DOWN arrow to
change the Auto time by 0.5 hour increments,
up to 10 hours, then at 1 hour increments up to
24 hours. The control will count down the time
remaining until start.
• The selected time will register in 5 seconds and
the system will automatically revert back to
display the previous temperature setting.
o Turning the unit ON or OFF at any time or
adjusting the timer setting to 0.0 will cancel
the Auto Start/Stop function.
• When LED display window displays code of El,
E2, P1 or theAuto Start/Stop function will also
be cancelled.
TURBO button
0
FAN
O O
O TIMER 0_ TIMER ¢_FF
0 AUTO 0
NOTE:
Used to set the strong fan speed, the set
temperature will reach in the shortest time.
This function is only available in COOL mode.