Using " Set Up " Keys; Using Math Mode - Citizen SR-270X Manual De Instrucciones

Give " 2: STAT " as an example:
Method : Press [ MODE ] and then key in directly the number of
the mode, [ 2 ] , to enter the desired mode
immediately.

Using " SET UP " keys

[ 2nd ] [ SET UP ] display the setup menu that enables you to specify
the input /output format, the angle mode, the numeric notation, the
statistical setting or the contrast adjustment. The setup menu consist
of two screens which you can jump between by using [
1: M thIO 2: LineIO
3: D eg 4: R a d
5: G ra 6: Fix
7: S ci 8: N o rm
MthIO : Math mode displays inputs and outputs in textbook
format. (the default)
LineIO : Linear mode displays inputs and outputs in a single
line.
Deg : Deg mode sets the angle unit to degrees (the default)
Rad : Rad mode sets the angle unit to radians
Gra : Gra mode sets the angle unit to gradians.
Fix : Fix decimal setting (0 through 9)
Sci : Scientific notation (0 through 9)
Norm : Norm specifies the range (Norm1, Norm2) in which
the results are to be displayed in exponential format
or in non-exponential format (Norm1 is the default)
ab/c : ab/c displays the fraction in mixed number format
d/c : d/c displays the fraction in improper format (the
default)
STAT : STAT sets the Statistical Data Editor Screen to show
or hide the FREQ column
Disp : Disp sets the decimal point to Dot ( . ) or Comma ( , )
(Dot is the default)
CONT : Contrast Adjustment

Using Math Mode

Press [ 2nd ] [ SET UP ] [ 1 ] to enter Math mode. While in math
mode, the values for functions such as
X
e , √ , ,
3
X
in a mathematically written way. By default, SR-270X is in Math
mode. See Example 1~2.
File name : HDB0R100721_English_text_100426.doc
version : 10/04/26
1 : ab/c
3 : S TA T
5 :
−
2 3 1 y
, , , , x ....can be entered and displayed
X X X
E – 5
] and [
2: d/c
4: D isp
C O N T
d b
, A , log b, Abs, 10
a
e c
].
x
,