English - JVC HA-S90BN Manual De Instrucciones

ENGLISH

Thank you for purchasing this JVC product. Before you begin operating this unit, please read the operating instructions carefully to be sure you enjoy the best possible performance. If you have any
questions, please consult your JVC dealer.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
To reduce the risk of electrical shocks, fire, etc.
• Do not disassemble or modify the unit.
• Do not allow flammable, water or metallic objects to enter the unit.
For your safety...
• In dryer air conditions such as in winter, you may feel some static shock when using the headphones.
• Should you start to feel ill while using the headphones, you should stop using them immediately.
• Be sure that your hair or any other objects do not get caught in the headband slider (adjuster) when
adjusting the headband.
NOTE
If the System does not work correctly, charge the System to reset it.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by JVCKENWOOD Corporation (JVC) is under license. Other trademarks and trade names are
those of their respective owners.
• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other
countries.
HA-S90BN
1
NC OFF
Hold down Red/Blue
When the power is off, hold down the button for 3 seconds (7
seconds if you are using them after the second time) until the
indicator flashes alternately in red and blue.
Noise canceling
(for HA-S90BN only)
×1
×2
+
×3
×1
Answer/
End
• This unit cannot guarantee operation of all of the remote control functions depending on the device.
WARNING
CAUTION
2
Select "JVC HA-S90BN" ("JVC HA-S70BT") from the device list. The indicator flashes slowly in blue when pairing is complete.
• During the pairing process, the other device may require input of a PIN code. In such a case, enter "0000" as the PIN code for the System.
MUSIC
ON
OFF
NORMAL BASS
–
PHONE
1 sec.
Reject/
Switch between phone and headphones
Standard
Profiles
Frequency range
Max. communication distance
Codecs
Output power
Frequency response (when using
a wired connection)
Power supply
Battery life
Charging time
Usage temperature range
Mass
Accessories
• Designs and specifications are subject to change without notice.
CHARGING
• When charging the headphones, be sure to use a USB to AC adapter with DC 5 V power output to avoid
malfunction or abnormal heat generation.
• Use only the supplied charging cable to charge the System.
• Do not use the System as the rechargeable battery may become hot while being charged.
The indicator lights up in red, and charging starts. When charging is complete, the indicator goes out.
• When the remaining battery power is low, the alarm sounds every 4 minutes.
• Operation is not possible while charging.
CONNECTING
JVC HA-S90BN
For HA-S90BN
Flashes in blue
CLEAR
Hold down
3 sec.
Using the System as conventional headphones
When you do not want to use wireless connection, you can use the System as conventional headphones by
connecting the supplied audio cable.
• Although noise canceling is enabled, it is disabled when the battery runs out (for HA-S90BN). Other
buttons and microphone are disabled.
- 6 -
Specifications
BLUETOOTH v3.0 Class 2
A2DP/AVRCP/HSP/HFP
2.402 GHz - 2.480 GHz
Approx. 10 m (33 ft)
SBC
+4 dBm (MAX), Power Class 2
8 Hz - 25 000 Hz
Internal rechargeable lithium battery
Approx. 16 hrs (NC+BT), Approx. 27 hrs (BT), Approx. 35 hrs (NC)
(Depends on usage conditions.)
Approx. 3.5 hrs
5 °C (41 °F) to 40 °C (104 °F)
195 g (6.88 oz) (including internal rechargeable battery)
Charging cable / Audio cable (detachable cable) / Carrying pouch
(S90BN only)
• You can connect your
smartphone to the System
easily with NFC. Using NFC,
touch the N mark on the
System with the smartphone.
ON and OFF
ON : The indicator lights up in blue for 1 second. The indicator flashes
slowly in blue when the unit is connected, and flashes slowly in red
when the unit is not connected.
OFF : The indicator lights up in red for 1 second.
• If no BLUETOOTH device is connected for about 5 minutes, the System
automatically turns itself off.
• When you turn on the unit for the first time after purchasing, the indicator
flashes alternately in red and blue and pairing begins automatically.