Bdc2010 General Operating Instructions - Caframo BDC2002 Manual De Instrucciones

BDC2010 General Operating Instructions

Make sure the stirrer is securely mounted as specified in the installation
instructions . ensure the mixing paddle or impeller is securely attached to the
desired position .
The stirrer is now ready for use to mix liquids and liquid/solid solutions .
Appropriate impeller and container specifications must be determined by the
operator, ensuring that all safety instructions are followed .
Keypad Functions
Power Button - Turns the stirrer on and off .
Multi-Function Button – sets three parameters - speed (rpm),
countdown timer (minutes) and x
Increase Button - Increases the speed by one rpm or the countdown
timer by one minute or the x
Decrease Button - Decreases the speed by one rpm or countdown
timer by one minute or the x
Reverse – Reverses the direction that the impeller is turning . The
impeller turns clockwise by default .
start/Pause Button – Allows the stirrer to be paused and started again .
Use this button to start the stirrer when ready .
light Power Button - Turns the light on and off . The stirrer must be
plugged in for the light to function .
Four Digit leD Display – Displays either the speed (rpm),
countdown timer (minutes) or x
decimal points are used to indicate the following parameters . These
j k l
do not act as numeric decimal points .
j indicator that speed is displayed
k indicator that time is displayed
l indicator that cycle time is displayed
•
indicator that stirrer is turning counter clockwise
During set-up the indicator light is solid . When the stirrer is
running, the indicator light flashes .
x agitation (seconds)
R
x agitation by one second .
R
x agitation by one second .
R
x agitation (seconds) . The four
R
16