en
Problem
Loss of pressure
Steam release button activated during a
during ironing.
long period of time.
Water leakage
Drainage plug located at the bottom of the
from the boiler
appliance is loose.
If the above does not solve the problem, get in touch with authorized technical service.
Warranty conditions
The terms of the guarantee for this appliance are in
accordance with that stated by our representative
for the country in which it is sold. The details of
these conditions can be obtained from the retailer
from whom the appliance was purchased. The
purchase receipt must be presented when making
any claims against the terms of this guarantee.
You can download this manual from the local homepages of Siemens.
14
Possible causes
Advice on disposal
Our goods come in optimised packaging. This
basically consists in using noncontaminating
materials which should be handed over to the
local waste disposal service as secondary raw
materials. Your local town council can give you
information about how to dispose of obsolete
appliances.
The guideline determines the framework for
the return and recycling of used appliances as
applicable throughout the EU.
Solution
Use the steam release button (11) with
intervals. This improves the ironing
result as the textiles will be dried and
stay smooth better.
Tighten up boiler drainage plug with
a coin
This
appliance
is
accordance
with
Directive 2002/96/EG concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
labelled
in
European