User Functions; Screen "Partial; Screen "List User Totals Period - CEMO CMT10 Manual De Operación Y Mantenimiento

GB
It shows successively following information:
1. Product name: "DF TAG"
2. Firmware version: "r1.0"
3. Current unit of measure: "Unit" "Litres"
4. Current calibration factor (imp/l): "CAL" "40.00"
5. Machine code: "codMAC" "0"
The display reset can also be done starting
from "USER" mode, press
simultaneously for 2 seconds.
With this procedure, nothing will be erased.

3.4.2 USER FUNCTIONS

The system if left untouched or if not receiving any
pulses for at least 60 seconds automatically goes
back to "Partial" screen i.e. USER mode, screen
from which transactions are initiated. This mode
can be accessed by anyone even without and TAG
or card. Each time
ing screens sequence will be displayed:
1. Total, preceded by message "Total Litres"
2. Total period, preceded by message "TotPer"
Starting from "Partial" screen ,each time
is pressed, the period total for each user created by
the MASTER can be visualized or eventual blocked
users.
3.4.2.1

SCREEN "PARTIAL"

Displays 4.2 digits, any transaction will always start
from that screen. Independently of the screen cur-
rently displayed, after 10 seconds without activity
14
and
button is pressed, follow-
button
in USER mode or 60 in MASTER mode, the system
automatically return to that starting screen.
This screen is used as initial condition to describe
other 4 available screens.
3.4.2.2 "TOTAL" SCREEN MESSAGE
"TOTAL LITRES"
totAL LItrES
displays 6 digits, no decimal, shows all litres
transferred since first use. Cannot be reset.
3.4.2.3 "TOTAL PERIOD "SCREEN WITH
MESSAGE "TOTPER"
totPEr
displays 5.1 digits, shows all litres
transferred in the defined period of time since the
last download of data or last cancellation of totals.
This totalizer can only be reset by the MASTER.
(see paragraph 3.4.1.1)

3.4.2.4 SCREEN "LIST USER TOTALS PERIOD"

tottAG tAG
displays 05.1 digits, always on, permits
to visualize totals for each authorized user and
eventual blocked users. At each time
is pressed, user TAG number is shown and
successively the total of transactions made during
that period.
LOCHEd
button