Indoor Unit Installation - CLIMAVENETA a-CHD U-2T Serie Manual De Instalación Y Funcionamiento

INDOOR UNIT INSTALLATION

WHERE TO INSTALL INDOOR UNIT
There should not be any heat source or steam near the
unit. Where there is no obstacle in the air passages in
and out of the unit.
Cassette has to be installed in:
• A place where air circulation in the room will be good.
• A place where drainage can be easily obtained.
• A place where noise prevention is taken into considera-
tion.
• Where it is wide enough to leave sufficient space around
the unit for service works.
• Consider using an area where installation is easy.
INSTALLAZIONE DELL'UNITÀ
• Select the location where a space between the air dis-
charge outlets and the wall or any air obstruction objects is
more than 100 cm. as shown in the figure 1. Also ensure
that the position does not interfere with light fittings, sprin-
kle heads, etc.
• Drill holes in the ceiling using the template provided in the
packaging (also see the dimensional drawings).
• Mark the position of the hangers on ceiling by using posi-
tion (A, B, C, D) in the paper pattern.
• Depending on the type of ceiling the hangers can be fixed
as shown in the figure 2.
• Once the threaded hangers have been positioned, do not
tighten the nuts, and insert the washers as shown in the
figure 3.
Carefully lift the unit (without the frame) using the four
suspension brackets (or the four corners), inserting it
into the false ceiling.
• Align and level the unit by adjusting the nuts and locknuts
on the threaded hangers, maintaining a distance of 25-30
mm. between the sheet metal body and the underside of
the false ceiling (figure 5).
• In rooms with high humidity, brackets should be insulated
by self adhesive insulation.
Model
CHD 606
CHD 706 -1108-2209
Louvers of cassette air grille could be managed manually by the installer. They could not be controlled by wall mounted ther-
mostat or connected to power supply.
14
EN
A (mm) B (mm)
255 ≥ 10
290 ≥ 10
1
2
3
4
5
25-30 mm
6
Installation
>100 cm
B
A