Menu Navigation - WellerFT LASERLINE 200V Manual De Uso

Menu navigation

SPEED
MANUAL / AUTOMATIC
Submenu functions
To select a menu item,
press the Menu key. Each
time the
Menu key is pressed, the
next menu item is selected.
The display automatically
returns to the default
operating mode after five
seconds.
5 sec
5 sec
16
LASERLINE
VER BL.FW
5 sec
100 %
FILTER TIME
CURRENT HOURS
FILTER TIME OFF
DEFAULT
FILTER TIME
RESET
Display after power-on
BL = bootloader version
„
FW = firmware version
„
OFF MODE
OFF MODE
The turbine and the backlit display
are off.To activate/deactivate, press
the UP/DOWN keys simultaneously.
Default operating mode
The speed (30-100%) can be
entered using the UP/DOWN
keys.
0
Filter time display
Displays filter time (filter operating
hours) elapsed since last Reset.
Specified filter time
Specifies the fixed nominal
filter life ominal filter operating
hours
Adjustable from one hour to 999 days
„
Default setting as-delivered 200 days
„
After this time expires, the unit
„
switches to „red"
and an audible signal also sounds
NO