Maintenance Instructions; Storage Instructions - Matco Tools SL360MDLX Manual Del Usuario

Luz de trabajo inalámbrica led de 360 de ión-litio
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5.
CHARGING
IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will
reduce the battery's capacity and may void the warranty.
5.1 Using the AC wall charger: Connect the micro USB end of the charging cable to
the micro USB port on the back of the work light. Insert the USB end of the cable
into the USB port on the wall charger. Plug the AC charger into a live AC outlet.
5.2 Using the 12V DC car charger: Connect the micro USB end of the charging cable
to the micro USB port on the back of the work light. Insert the USB end of the
cable into the USB port on the 12V car charger. Plug the 12V car charger into a
12V DC power outlet.
5.3 Plug into your power supply. The green charging status LEDs will flash, to
indicate charging has begun.
5.4 The number of green lights flashing indicates the level of charge. When the
battery has charged fully, all three LEDs will show steady green.
5.5 Recharge the work light after use, and at least every 6 months.
6.
OPERATING INSTRUCTIONS
6.1 Hang the work light, using the hooks on the back. When hung from a single hook,
the work light can be rotated 360° for more precise positioning.
6.2 The magnets may be used instead. Attach to any ferrous metal surface.
6.3 Direct the lens away from your eyes before turning on the work light.
6.4 Press
once to turn on the 3W end LED.
Press
a second time to turn on the high-power SMD LEDs.
Press
a third time to turn on the low-power SMD LEDs.
Press
to turn off.
6.5 Recharge the work light after use, and at least every 6 months.
7.

MAINTENANCE INSTRUCTIONS

7.1 After use and before performing maintenance, unplug and disconnect the work light.
7.2 Use a dry cloth to wipe any dirt or oil from the chargers, cords and case.
7.3 Any servicing should be performed by qualified service personnel.
8.

STORAGE INSTRUCTIONS

8.1 Store inside, in a cool, dry place.
8.2 Take care to avoid/prevent damage to the chargers, cords and unit. Failure to do
so could result in personal injury or property damage.
• 5 •
VOTING

Publicidad

Tabla de contenido
loading

Tabla de contenido