Time Setting
1. Hold
push button for 2 seconds and digital display will begin to blink.
push button again to set HOUR by using the < and >
2. Press
push buttons.
push button again to set MINUTES by using the < and >
3. Press
push buttons.
4. After time has been set, time setting mode will automatically exit after
4 seconds without any action.
Note: In order to change time from AM to PM, you must cycle through
the 12 hours using the < and > push buttons.
< >
Hold
for
2 seconds
to set time
function
Press
to
select hour
or minutes
for setting
Press < or > to
adjust the time