5. cleAning your ProgrAMMAble Pot
Your programmable pot has one of the most non-stick surfaces, made of PTFE that generates incredible non-stick properties,
this makes cleaning easier to the extent that the use of any type of pad or abrasive cleaning is not necessary to clean the cup,
even dish washable.
Along with the cup, the items that are in direct contact with the food should also be cleaned. These are the inner lid, the lid,
the silicone ring and the exhaust valve. They should be cleaned with soap and water and using a sponge or, if necessary, a
scouring pad.
To remove the inner lid and the silicone ring, pull the small holder in the inner lid and remove easily the silicone ring in it, the
important thing is to clean each time you use it, otherwise you can alter the taste or odor in the following meals to be cooked
with your programmable pot.
Regarding the safety filter and the exhaust valve, it is important to keep them clean so they never obstruct the steam and so
that you can open your pot when you want.
AUTO-CLEANING MENU: after cooking add to the bowl two measures of water and a little vinegar, if the food is cooked is
very oily, you can add a few drops of degreaser, and activate the pop-up menu 'Cleaning'. Once finished, sponge and rinse
with water to clean the bucket.
REMOVE
Inner lid
Remove the
inner lid
Silicon ring
Inner lid holder
PUT
59