Backlight - Skywatch Xplorer XP-01 Manual De Instrucciones

1. Backlight

To get the backlight to light up keep the button pressed for 1 second and as soon as the backlight lights up, release the button. The backlight
remains illuminated for 3 seconds. If within the 5 seconds which follow you re-illuminate the backlight, it stays lit up for 15 seconds. Beyond
these 5 seconds, it lights up again for 3 seconds.
Note : the backlight lights up in the same way in all modes.
IMPORTANT : intensive use of the backlight reduces the life of the battery / consumption approximately 100 x greater than without
backlight.
2. Modes and mode changing
Brief pressure on the button allows you to move to the following mode.
MODES :
Xplorer 1 (1 mode) Xplorer 2 (3 modes)
1. wind + max. wind 1. wind + max. wind
2. wind +temperature
3. wind + wind chill temperature
Please refer to the following sections to consult the functions available in each mode.
Xplorer 3 (4 modes)
1. wind + max. wind
2. wind +temperature
3. wind + wind chill temperature
4. wind + compass
18
Xplorer 1 – 2 – 3 – 4
Xplorer 1 - 2 – 3 – 4
Xplorer 4 (9 modes)
1. wind + max. wind
2. wind +temperature
3. wind + wind chill temperature
4. wind + compass
5. wind + altitude and max. altitude
6. wind + relative and absolute pressure
7. record of pressure trends
8. record of relative pressure
9. record of altitude