Troubleshooting; Storage; Technical Data; Disposal - Proficook PC-MS 1135 Instrucciones De Servicio

Troubleshooting

Problem Cause
The appli- Appliance
ance does without power
not turn on supply.
or stops
operating.
The foam con-
tainer (2) was not
set properly on
the base (10).
The device is too
hot. Overheating
protection is
activated.
Appliance
defective.
The milk The milk is too
foams a hot.
little or not
The stirrer for
at all.
making foam (11)
was not used.
The load capaci-
ty is exceeded.
Milk escap- The load capaci-
ing from the ty is too large.
lid.

Storage

• Clean the appliance as described and allow it to
dry.
• During longer periods of non-use we recommend
storing the appliance in its original packaging.
• Always keep the appliance at a well-ventilated and
dry location, out of the reach of children.
38
Model: ....................................................... PC-MS 1135
Solution
Power supply:..................................220 - 240 V~, 50 Hz
- Check the outlet
Power: ........................................................ 550 - 650 W
with another
Capacity: ....................550 ml (Milk foam about 350 ml)
appliance.
Protection class: ........................................................... II
- Insert mains
Dimensions (approx. W x H x D): .105 x 200 x 105 mm
plug (9).
Net weight: ....................................................... 0.819 kg
- Check the
The right to make technical and design modifications
house fuse.
in the course of continuous product development
Set the foam tank
remains reserved.
(2) correctly on the
base (10) so that
This device has been tested according to all relevant
the safety switch is
current CE guidelines, such as electromagnetic
depressed.
compatibility and low voltage directives, and has
Allow the appliance
been constructed in accordance with the latest safety
to cool.
regulations.
Contact our
service center or a
Meaning of the "Dustbin" Symbol
specialist.
Use milk at refriger-
ator temperature.
Insert the stirrer for
creating foam (11)
and prepare the
Please help to avoid potential environmental and
milk again.
health impacts through improper waste disposal.
Fill the tank up to
This will contribute to the recycling and other forms of
the MAX level (4)
re-utilization of electrical and electronic equipment.
for foaming.
Information concerning where the equipment can be
Reduce the load
disposed of can be obtained from your local authority.
capacity to the
according level
(3 or 4).

Technical Data

Disposal

Protect our environment: do not dispose of
electrical equipment in the domestic
waste.
Dispose of obsolete or defective electrical
appliances via municipal collection points.