Dmx Functions - TECshow HALO 740 XL Manual De Usuario

DMX Functions

Enter MENU mode, select DMX Functions, press the
ENTER button to confirm, use the UP/DOWN button
to select DMX Address, DMX Channel Mode, View
DMX Value or WDMX Setting.
DMX Address
To select DMX Address, press the ENTER button to
show the DMX ADDRESS on the display. Use the UP/
DOWN button to adjust the address from 001 to 512,
press the ENTER button to setup. Press the MENU
button back to the last menu or let the unit idle one
minute to exit menu mode.
DMX Channel Mode
To select DMX Channel Mode, press the ENTER but-
ton to show the DMX CHANNEL MODE on the display.
Use the UP/DOWN button to select Mode 1(11) ,Mode
2(15) or Mode 3 (14), press the ENTER button to set-
up. Press the MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
View DMX Value
To select View DMX Value, press the ENTER button
to show the VIEW DMX VALUE on the display. Use the
UP/DOWN button to view the DMX channel values.
Press the MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
WDMX Setting
To select WDMX Setting, press the ENTER button to
show the WDMX SETTING on the display. Use the UP/
DOWN button to select Active, Retransmit, Reset
Memory orWDMX Setting, press the ENTER button to
setup. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
Fixture Setting
Enter MENU mode, select Fixture Setting, press the
ENTER button to confirm, use the UP/DOWN button
to select Pan Inverse, Tile Inverse, P/T Feedback,
BL.O. P/T Moving, White Balance, Cooling Mode,
Dimmer Curve or Dimmer Speed.
P. 6
Tecshow Halo 740 XL - English version
Pan Inverse
To select Pan Inverse, press the ENTER button to
show the PAN INVERSE on the display. Use the UP/
DOWN button to select No (normal) or Yes (pan in-
verse), press the ENTER button to setup. Press the
MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Tilt Inverse
To select Tilt Inverse, press the ENTER button to
show the TILT INVERSE on the display. Use the UP/
DOWN button to select No (normal) or Yes (tilt in-
verse), press the ENTER button to setup. Press the
MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
P/T Feedback
To select P/T Feedback, press the ENTER button to
show the PAN/TILT FEEDBACK on the display. Use the
UP/DOWN button to select No (Pan or tilt's position
will not feedback while out of step) or Yes (Feedback
while pan/tilt out of step), press the ENTER button to
setup. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving
To select BL.O. P/T Moving, press the ENTER button
to show the BLACKOUT WHILE PAN/TILT MOVING
on the display, use the UP/DOWN button to select
No (normal while pan/tilt moving) or Yes (blackout
while pan/tilt moving), press the ENTER button to
setup. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
White Balance
To select White Balance, press the ENTER button to
show the WHITE BALANCE on the display, use the
UP/DOWN button to select Red, Green or Blue. Once
selected, press the ENTER button to confirm, and
use the UP/DOWN button to adjust the value from
125 to 255, press the ENTER button to setup. Press
the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.