Reset Functions - TECshow HALO 740 XL Manual De Usuario

Contrast Ratio
To select Contrast Ratio, press the ENTER button to
show the CONTRAST RATIO on the display. Use the
UP/DOWN button to adjust the intensity from 1 to
30. Once selected, press the ENTER button to setup
and store. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu
mode.
Temperature Unit
To Select Temperature Unit, press the ENTER button
to show the TEMPERATURE UNIT on the display. Use
the UP/DOWN button to select °C or °F, press the EN-
TER button to store. Press the MENU button back to
the last menu or let the unit idle one minute to exit
menu mode.
Display Warning
To select Display Warning, press the ENTER button
to show the DISPLAY WARNING on the display. Use
the UP/DOWN button to select No (Normal) or Yes
(display will show the error warning when the unit
went wrong), press the ENTER button to store. Press
the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
Language
To select Language, press the ENTER button to show
the LANGUAGE on the display. Use the UP/DOWN
button to select English or Chinese, press the EN-
TER button to store. Press the MENU button back to
the last menu or let the unit idle one minute to exit
menu mode.
Fixture Test
Enter MENU mode, select Fixture Test, press the EN-
TER button to confirm, use the UP/DOWN button to
select Auto Test or Manual Test
Auto Test
To select Auto Test, press the ENTER button to
show the AUTO TEST on the display. Press the EN-
TER button, the unit will run built-in programs to
P. 8
Tecshow Halo 740 XL - English version
automatically test pan, tilt and zoom. Press the
MENU button back to the last menu or exit menu
mode after auto test.
Manual Test
To select Manual Test, press the ENTER button to
show the MANUAL TEST on the display. Press the
ENTER button, and then use the UP/DOWN button to
select channel, and adjust the channel value. Once
selected, press the ENTER button to setup, the fix-
ture will run as the channel value indicates. Press
the MENU button back to the last menu or exit menu
mode let the unit idle one minute.
(All channels value will become 0 after exiting Man-
ual Test menu).
Fixture Information
Enter MENU mode, select Fixture Information,
press the ENTER button to confirm, use the UP/
DOWN button to select Fixture use time or Firm-
ware Version.
Fixture use time
To select Fixture use time, press the ENTER button
to show the FIXTURE USE TIME on the display. Press
the ENTER button, the fixture working hours will
show on the display. Press the MENU button to exit.
Firmware Version
To select Firmware Version, press the ENTER but-
ton to show the FIRMWARE VERSION on the display.
Press the ENTER button and the fixture software ver-
sion will show on the display. Press the MENU button
to exit.

Reset Functions

Enter MENU mode, select Reset Function, press the
ENTER button to confirm, use the UP/DOWN button
to select Pan/Tilt, Zoom or All.
11G
Pan/Tilt
To Select Pan/Tilt, press the ENTER button to show
the PAN/TILT on the display. Use the UP/DOWN but-
ton to select Yes (the unit will run built-in program