Cleaning And Maintenance; Technical Specifications - AEG BHT 5615 Instrucciones De Servicio

6. Switch the device off before you remove the comb at-
tachment from the trimmer.
Outlining and Shaving the Neck
• Use the beard trimmer without a comb attachment.
• The clipper head allows precise outlining the shape of
the beard, even in difficult to reach places as well as a
clean shaving of the hair-line at the neck.
Using the shaver attachment
The shaver attachment has been specifically designed for
close shaving on the beard, moustache and sideburns.
1. Attach the shaver attachment (1) to the device.
2. Switch the device on.
3. Hold the device in such a way that the shaver attachment
makes light contact with the face at a 45 degree angle.
Removing nasal hair / ear hair
WARNING: Risk of injury!
• Only remove hair protruding from the nostril / ear lobe.
• Never push the device into the nostril / ear lobe using
force.
• Never insert the device into the nostril / ear lobe further
than the narrow tip of the shaver head.
1. Attach the nasal hair / ear hair trimmer (11) to the device.
2. Switch the device on.
3. Carefully insert the tip of the shaver head into the nostril
or ear lobe and remove it again.
Trimming body hair
WARNING: Risk of injury!
• Be particularly careful when trimming around moles!
• In the case of eczema, inflamed skin reactions or
wounds, we recommend that you refrain from shaving
body hair until the symptoms have faded away.
• Only lightly press the blade of the body hair trimmer
onto the skin!
1. Place the body hair trimmer (12) on the device.
2. Using the comb attachment (13), select a cutting length
(approx. 3/6/10 mm). Slide the comb attachment into one
of the three tracks on the trimmer.
3. Switch the device on.
4. Lightly press the flat side of the comb attachment onto
the skin.
5. Slowly move the trimmer through the hair in the direction
of growth.
6. Switch the device off before you remove the comb at-
tachment from the trimmer.
7. To shorten the hair fully, use the body hair trimmer with-
out a comb attachment.
Finish Operation
Switch the device off using the ON / OFF button.

Cleaning and Maintenance

WARNING:
• Do not submerge the unit in water.
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
• Regular cleaning and maintenance ensures optimum
results and long lifetime.
• Turn the unit off and disconnect from mains power sup-
ply, if necessary.
• If necessary, remove the comb attachment from the trim-
mer.
• In order to remove the foil of the shaver attachment,
jointly press the buttons (2).
• Use the cleaning brush to remove remaining hair after
use.
• Replace the foil of the shaver on the shaver head. You
must hear it click into place.
• Regularly apply 1 – 2 drops of non-resinous / acid-free oil
to the shaver heads of the trimmer (7, 8, 12).
• Clean the casing with a slightly damp cloth, if necessary.
Noise emission
The workplace-related emission value is less than 70 dB(A).

Technical Specifications

Model: ................................................................................BHT 5615
Net weight incl. mains adapter: ........................approx. 0.239 kg
Mains adapter
Protection class: ................................................................................II
Voltage supply: .......................................AC 100 - 240 V, 50/60 Hz
Output: ............................................................... DC 3.4 V, 1000 mA
Battery: .................................................2 x 1.2 V, 900 mAh, NiMH
Running time: ..............................................................60 mins. max
Charging time: .................................................................... 13 hours
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
English
27