CONTROLS AND ELEMENTS
7
1. Bread slot
2. Ignition lever
3. Toasting time selector
4. Cancel button and indicator light (Cancelar)
5. Button and light to reheat (Recalentar)
6. Button and light for thawing (Descongelar)
7. Crumb collector tray
USING THE TOASTER
This device supports any type of bread provided it does not exceed the
maximum width of the input slot (approximately 30 mm).
1. Insert the plug on the power cord into an electrical outlet of 230 V 50 Hz,
provided grounding.
2. Insert one or two slices of bread in slot 1.
3. Turn the toasting time selector 3 according to your preference, but note
that not all breads are roasted in the same way. Depending on the
thickness and type, you must select the toasting time.
4. Press the lever switch 2 down until it reached the stop lever in this position
will remain on hold and the bread will be centered by the mounting
brackets. The power indicator light 4.
5. After the toasting time, the lever will automatically release and toasts will
be expelled, while the toaster is switched off and the power indicator 4
goes out.
4
6
3
5
5
1
2